14 October 2007, 11:43 AM
Denise Stahlpocket won't print
Hi, I am finally printing out my slacks pattern and have hit a new snag. The inseam pocket shows up in the 25%, but the whole pocket does not print out. Help!----Denise
14 October 2007, 12:07 PM
Kaaren HobackInseam pocket is below the waist band in Extras which is page A2 with 8.5 by 11 inch paper.
Also the default pocket is traditional but I always adjust both the width and depth- I like em deeper.
14 October 2007, 12:09 PM
Mr. PatI'm running DS7+ I ran into the same problem for printing a pair of walking shorts. On mine the welt pocket is above the inseam pockets on the scree and when printed. There seems to be a limit to how many pages DS can handle, on my computer it is 8 pages tall. The solution I found since I never heard back from Tech Support was to turn off the welt pocket which moved the inseam pockets up on the page enough to print. Then I printed just those sheets I needed. Then I put the welt hip pocket back in and printed it.
14 October 2007, 12:19 PM
Kaaren HobackHi- Im not familiare with a page length Limit to print but on full scale with a waist band the inseam pocket is pages 7ab and 8ab
I never ever print a waist band- I just cut one based on the width and length I need which can be otained on screen- if I use one so removing the waistband from the print demand places the pocket on the extra pages right at top.
Since Im changing the format any way I also reduce the s/a on just the pocket print out as I would never use a whole 5/8ths for a pocket.
14 October 2007, 12:20 PM
Denise StahlI am able to print the upper part of the pocket, but the lower part disappears in full/100% scale.----Denise
quote:
Originally posted by Kaaren Hoback:
Inseam pocket is below the waist band in Extras which is page A2 with 8.5 by 11 inch paper.
Also the default pocket is traditional but I always adjust both the width and depth- I like em deeper.
14 October 2007, 12:24 PM
Denise StahlI removed the waistband option and the pocket appeared.----Denise
14 October 2007, 12:40 PM
Kaaren Hobackmake sure you have inseam pocket selected, adjust dimensions as desired then click "extra" to view the pocket alone. print will print a full scale pocket- I just checked it.
Kaaren
15 October 2007, 06:05 PM
Denise StahlI tried it again but the only way it would work was to remove the waistband then print the pocket. I wonder if it is because I have Vista. It came with the computer, grrrr. I never use a new operating system until the bugs are out and this one is driving me nuts!----Denise