I'm printing patterns using the patch/update ...whatever it's called... that says I'm running on 2.01b.

I've printed several pants patterns and the back pattern pc is missing the pattern label near the center that includes the pattern #, measurements used, date, build etc. The back pattern is labeled as a front on the info that runs down the side of the page.

The label information is also missing from the screen when you open the pattern so without going to the measurement tab you can't be sure which measurement set you're using.

This may be a function of the update/patch which will be fixed when it is integrated to the master but I've noticed some other oddities using the print function with the patch applied so wanted to make sure you were aware of them.

Vicki in TX

There are 3 views to any pattern: left side, right side, or both sides. That last one has limited use, generally with asymmetric patterns where the left and right sides are not identical. I've noticed that the pattern labels of pants in the back, when viewing "Both" sides are not shown on the pattern. If you view "Left" or "Right" views, they are. This is one of those bugs that is both obscure, has minimal consequence (since the front pattern piece does have all the relevant information on it and easy enough to get around (just pick a meaningful view mode) that we did not bother to fix it when it first came up. Some day....

Okay! You're right. For some reason my parameter was set to both sides but "both" sides didn't show on the screen so I didn't realize anything was wrong.

Changed it to right sides and the labels are back. Good deal!!

Thanks, Vicki